3D printer pen, cultivate three-dimensional ability -part 3

Prepare 3D printing pens, consumables, transparent pads, paper molds, and the maker tools mentioned before. For the first time, it is recommended that user should create simple straight lines, curve first. There is no odor in the drawing process, but there is a phenomenon of drawing, which can be cleaned with a blade or scissors.

The drawn pattern will quickly condense and can be easily shoveled with a small spatula. The backing plate is divided into two sides: smooth and rough. It has no obvious effect on the cleanup of the work, but the side of the work in contact with the backing plate will have a difference between smooth and rough, the user can choose to paint on both sides of the pad according to demand. Due to the phenomenon of drawing of PLA material, there is also a melting of consumables at the tip of the paper, which can be cleaned with tweezers and scissors to prevent color contamination of subsequent works.

Each time the wire is replaced, the new consumables will not be immediately ejected from the tip of the pen. The previously used toner will remain in the heating chamber. After the refueling is completed, the residual toner must be placed in the blank space of the plate. Burn it out and continue painting. From this point of view, the design concept of the automatic emptying of piping used in the solar circuit is considered. Although the consumables have already been melted, it is not possible to re-condense and re-use it, but it can be automatically pressed while the user presses the back button. Drain the consumables in the pipeline to save waiting time.

Personal feeling, when using this amazing 3d printer pen, advanced users can also use plasticine pile or material carving into more personalized 3D molds, or further, through 3D modeling, with the help of 3D printers to print out their favorite mold, you can let your own work one step better.

In general, the 3D printer pen is a high-tech toy that can exercise children's (also adults of course) attention and confidence, exercise children's hands-on ability and space imagination ability, the price is also very fair, users with relevant needs can properly pay attention.

3D printer pen, cultivate three-dimensional ability -part 2

The 3D printing pen adopts a 5V, 2.1A split type power adapter, so it can be adapted to a mobile power supply to achieve a mobile application scenario. This product is no longer confined to a room with a socket, but can also go out and be carried out outdoors anytime, anywhere. The printer pen is a tree-like structure, of plastic material, delicate touch, comfortable grip.

Feed inlet, power indicator, heating status indicator, back-out keys, and silk-feed keys are arranged on the back of the printer pen and can be seen at a glance. When the inclined feed port is used, it is only necessary to insert the consumables into a stop of about 1 cm. When stopping, it is not possible to press the wire feed button before heating to the operating temperature.

After the power indicator and the heating indicator of the 3d printer pen are connected, the orange power indicator is on, and the heating status indicator on the lower side is changed from red to green one minute after the power is turned on, indicating that the user has entered the working state.

Into the wire button and back button, before heating to the operating temperature, press the two buttons of the 3d printer pen will not work, until the heating indicator light is green, the prompt has been heated to about 180 degrees, press the button at this time, and press the back button to exit the supplies, can be used to replace other colors. The black front part with cooling holes is a heating and cooling part, with a heating symbol for warning, it is recommended to change to a more striking red, to warn young players that do not touch the area to cause unnecessary harm.

Actually, 3D printing pens are very different from traditional 3D printers. The latter is basically a hand-painted work. The degree of exquisite work has a lot to do with the artist's technology, but it is relatively simple and rough, while the former is based on the use of microcomputers. The pre-input 3D model is used for printing and the work is more accurate and perfect, and it is closer to the concept of "printing" of traditional printers.

3D printer pen, cultivate three-dimensional ability -part 1

What we have brought for everyone today is such a “sacred pencil” that allows children to fully use their space imagination ability and easily DIY their own exclusive toys. It can enrich the children's leisure life, pull them back from the addictive online games to healthy play methods and lifestyle, and develop intelligence, exercise children's spatial imagination, and hands-on ability, and hone their confidence and perseverance. Experience the happiness brought about by labor.

The name of the pen is called 3d printer pen. I have a wide range of accessories including 10 bags of various consumables, 20 sheets of paper mold, 1 transparent plastic drawing board, a 3D youth creative technology education course and a maker kit. Ten sheets of paper film and a transparent pad are included.

There are three types of consumables available for 3D printing pens, namely ABS, PCL, and PLA materials. PLA consumables (polylactic acid) is a new type of biodegradable material made from renewable plant resources - such as corn cassava and other starches. It is environmentally friendly, has a small odor, and has a melting point of 180 degrees. The temperature melting point materials, color brightness, and light transmission are good, but it is strong, easy to stick paper drawing. In terms of melting point, light transmittance, color brightness, and environmental protection, PLA materials are significantly superior to traditional ABS materials, and the price is moderate.

The user can also purchase a PCL material with a lower melting point (about 90 degrees). The advantage is that it is not hot so you won't get hurt. The disadvantage is that the material is formed slowly and the price is relatively high. A 10-color PLA consumable is included in the kit. Each pack is 5 meters long. So it depends on your needs to choose the materials.