One Kind of Cheap Price Arduino Ethernet module for Enthusiast

Zduino Ethernet, is based on Arduino Ethernet module. However, it allows power and programming through the USB port, with these two factors considerable improvements over the regular ethernet arduino. It also incorporates the possibility of power from the arduino ethernet poe and has memory card reader.

Unlike Ethernet Shield for Arduino, this card is already included microcontroller, abarantando cost, reducing consumption and creating a much more compact device. The pinout is fully compatible with Arduino Ethernet with more functionality at a lower price.

With this module, you can connect your microcontroller Internet and create their network applications. The integrated network module can turn your W5100 Arduino on a Web server quickly and easily using the Ethernet library in IDE. Supports read and write Micro-SD cards.

Specifications Zduino Ethernet (POE Arduino Ethernet +):

- Processor: ATMEGA328P

- Operating voltage: 5V.

- Optimum Supply Voltage: 7 ~ 12V (40V max..).

- POE operating Voltage: 7 ~ 30V (48V require it.).

- Pinout E / S: 14.

- Pines: 3, 5, 6, 9, 10, 11 for PWM outputs;

- Pines: 10, 11, 12, 13 for SPI communication interface.

- CS Interface 4 is for memory card;

- Interface 10 is for CS W5100;

- Interface 2 is to disconnect;

- Analog Input Pins: 6;

- Intensity pin E / S: 40mA (The total current in the microprocessor during execution can not exceed 200mA 3.3V);

- IDC output: 50mA;

- Flash Memory: 32KB (0.5kb for bootloader, for 2KB SRAM, 1KB EEPROM for);

- Clock: 16 MHz;

- The TCP / IP Ethernet W5100 supports Power Over Ethernet (POE) driver.

- Download Micro USB: Supports Micro SD (8GB max.) Reading and writing;

If you are the 3d printer arduino enthusiast, you also could take the electronic component starter kit into consideration for it is pretty good. Just enjoy yourself!