Arduino and 3D printer accessories include lots of kinds. At this article, I wanna share you something about module board, 3D printer accessories, and smart robot accessories. If you are interested in them, you could have a look!
Specification:
Supply voltage: DC 12V
Static current: ≤35MA, attract current ≤65MA
Output voltage: DC 12V
Output power: 10A relay
Measurement input: NTC (10K 0.5%) Waterproof Sensor
Environmental requirements: -10 ~ 60℃, Humidity 20% ~ 85%
Dimensions: 48 x 40mm
Cable length: About 52 cm
Temperature control mode: ON / OFF
Temperature range: -50 ~ +110°C
Control accuracy: 0.1°C
Hysteresis accuracy: 0.1°C
Refresh rate: 0.5S
High temperature protection: 0 ~ 110°C
Resolution: When temperature is 0.1°C, the resolution is -9.9~99.9, other temperature segment is 1°C
It is sold at a price of $ 3.69.
Users can display the buttons and select the following nine kinds of functions in one, you can set and save 9 kinds of function parameters, you can also view the current function parameters, time parameter sets the minimum one second adjustable accuracy of better than 0.1 seconds.
Cheap price it is that only be sold at a price of $ 7.34.
Feature:
Product Model: ICO-SPC-10W
Specifications: 10 watts / 18 volts (for 12-volt system) (9-10W)
Test under standard conditions (temperature is 25 degrees, AM1.5, 1000w/m2)
Size: 350 x 245 x 17 mm (aluminum alloy frame, four mounting holes)
Peak voltage: 17.9 volts
Peak current: 0.56 Ann
Open circuit voltage: 22.41 volts
Short circuit current: 0.62 Ann
Power deviation: ± 5%
Net Weight: about 0.8 kg
Junction Box Type: without diode without wires
This one is only sold at a price of $ 28.39.
Large chip removal space: Small chip resistance, smooth chip removal, drilling heat is small, can reduce drilling contaminated. Extraordinary cutting edge sharpness: As a result of nanotechnology and advanced grinding technology, the drill cutting edge is sharper than before, can reduce the cutting forces and reduce broken drill rate, improve the hole wall quality.
Based clients application design tool: Drill bit rich varieties to meet different application requirements. All the parameters of the drill bit, such as drill core thickness, core of drilling taper, etc., are carefully designed, effectiveness significantly; Symmetrical cutting edge: In favor of efficient cutting, avoid offset drilling. Processing range: PCB, SMT, CNC, mould, plastic, copper, stainless steel and other precision metal parts processing.
It is only sold at a price of $ 5.45.
没有评论:
发表评论